Genie Cabbing Machine

The Genie is an all-diamond top performing gem maker that is quite convenient and will provide lasting service.

                                            This machine has 6 wheels as follows:

	An 80 grit 6" x 1-1/2" Galaxy Metal Bond diamond wheel for rough grinding.
	A 220 grit 6" x 1-1/2" Galaxy Wheel for final shaping and removing scratches  left from the 80 grit wheel.
	A 280 grit 6" x 1-1/2" Nova Resin Bond wheel for sanding and removing  scratches from the metal bond wheels.
	A 600 grit 6" x 1-1/2" Nova Wheel for pre-polish.
	A 1200 grit 6" x 1-1/2" Nova Wheel for pre-polish.
	A 14,000 grit 6" x 1-1/2" Nova Wheel for final polish.

The diamonds in the Galaxy metal-bond grinding wheels are plated on a steel rim with a hard, heat treated nickel alloy. You will appreciate their smooth, true-running surface, the fact that they never need dressing, and their fast, cool cutting speed.

The Nova resin-bond sanding and polishing wheels will outperform any other method available. The Novas are permanently charged with diamond that’s embedded within a tough, flexible plastic resin and backed by a thick, sponge rubber backing. This soft, flexible construction enables the surface of the Nova wheel to conform to your stone, eliminating flat spots and scratches so difficult to remove with other methods of polishing.

The Genie comes complete. Includes a 1/4 HP, 1725 RPM, 115 volt 60Hz industrial rated sealed capacitor start motor, 18" flex stem lamp, 15" magnifier, one 5-1/2" canvas polishing pad, cab rest, two grams 50,000 diamond polishing compound, four splash guards, sample bottle Water Aide, and a manual. Safety glasses are also included and must be worn when operating this machine.